Ghost 2 Immobiliser Problems
Designed to protect vehicles from key cloning and hacking to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that can be installed without damaging your car. It prevents you from starting your car unless you have entered the correct sequence of buttons in your vehicle. It is similar to the mobile password.
Stop/Start
Ghost immobilisers stop vehicles from being stolen by preventing the engine from starting until it has received the correct PIN code. This is done without modifications to the vehicle and is totally undetectable to thieves. The unit connects directly to the ECU via the CAN databus to immobilise the vehicle. This system is like the one automobile manufacturers have used in their vehicles for a long time, however, the thief cannot add a new key or utilize key relay technology to bypass it, as they could with factory-installed systems.
A Ghost can be fitted to any vehicle, van, motorhome, caravan or bicycle with an engine. It's compatible with all major brands of vehicles. The same system is also compatible with electric vehicles. It is a great alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will block all the buttons in your vehicle and prevent the ignition from being started until a PIN code has been entered before. This can be done via the Android or Apple mobile apps or by manually entering the code through your key fob. If the incorrect code is entered the app will show an indicator light. The Ghost will not let the vehicle to start again. This is a great way to deter thieves. If the vehicle can't be started, they will move on.
The Ghost is tiny weatherproof device that is able to be concealed in the most difficult to reach areas of your car. It is incredibly easy to install with an average of 20-30 minutes for each vehicle. It is also very simple to remove should you decide to change your vehicle or hand it in to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognized by some insurers. It also has a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button on the app or by using your key fob.
Disarm
Ghost immobilisers, unlike mechanical devices to prevent theft that can be removed, are concealed within the car. They are near impossible to bypass or hack and, even if they are discovered, thieves is unable to start the engine. This is because ghost immobilisers prevent key hacking, signal jamming and device spoofing - methods that are frequently used by thieves to gain entry into cars fitted with standard immobilisers.
The immobiliser sends a code to the ECU. If the incorrect code is received and the vehicle is not started as the engine will not fire up. It is possible to disable a ghost immobiliser using the aid of a software program, however it would be very difficult and time consuming to accomplish this. Only an authorized installer is able to install and use the software.
The Ghost immobiliser is a small device that is tucked away in the vehicles wiring loom and is invisible to the naked eye after it has been installed. It won't show up on diagnostic systems, it does not have LED indicators and it will not communicate with the engine through the OBD port. It communicates in a silent manner through the CAN data circuit.
The system will prevent the vehicle from starting unless it is given a specific PIN code sequence. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a much safer method of protecting your vehicle as it does not require a key fob or remote control.
In addition, Ghost has an option for service that can be activated by using the application on your mobile phone. This will allow you to hand over your keys to someone for service or valet parking without having to enter the disarm sequence.
It is not recommended to remove the system from your Ghost yourself, regardless of whether it's in service mode. This can damage the engine. It is best to contact an installer certified by TASSA who will safely and correctly remove the system. Our newest GHOST II immobilisers come with a special QR fingerprint sticker that is hidden in different locations of your vehicle. which are linked to our international security register - in the event that the system is removed and then sold on the black market it will be linked back to its original owner.
Anti-Hijack
The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This is a clever key that shields your vehicle from theft. Whenever the ignition switch is turned to on, and the vehicle is stationary for 30 seconds and the Ghost system will stop the engine and switch the hazards lights on. This allows the driver and passengers enough time to press the security button before the system can be activated.
Contrary to many other systems that simply stall the engine when the ignition is switched to on The Ghost system uses a special controller and timer unit which will shut off the valve for cutting off fuel 14 when it is activated after an agreed-upon time, even if the ignition is still turned on! The delay time must be sufficient to allow the hijacked vehicle owner to drive away and a distance sufficient from the car that it is stuck before the system can be activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an additional security level that blocks common hacking methods used to gain access to modern cars such as relay attacks keys range extending, relay attacks and ECU swapping. The Ghost system communicates in a quiet manner and does not emit signals that can be picked by a thief using codes-grabbing or RF scanning technology.
The Ghost system also has a Service / Valet mode that allows your vehicle to be temporarily started and driven without the need for PIN codes. This is great if you are parking your car and need to leave it for a short period of time, such as for example to put groceries in the boot or open a garage door etc. The system will exit the service mode according to the speed and duration or through a simple PIN code input process. This will give you complete peace-of-mind that only YOU can drive your car!
Keyless Entry
With the growing trend in car thefts that are not involving contact, many customers are seeking out additional security options. This is especially true for those who invested time and money in customizing their car or own expensive cars. An immobiliser add-on can be a cost-effective way to prevent this type of theft as it can prevent your vehicle from starting until the correct pin code is entered on your key fob.
ghost immobiliser problems are designed for a variety vehicle circuits including those which control starter motors and fuel pumps. They can also disable the alarm for cars in order to draw attention and scare away potential thieves.
These devices are directly connected to the engine control unit using the CAN data network. They prevent the thief from bypassing it by installing a replacement ECU or using key programmers. The immobilisers are fitted discretely and do not leave any marks on your vehicle. They are also not detected with the latest tools of thieves.
The Ghost immobiliser is unlike other systems that require the driver to carry an app or tag. Instead, you are able to choose your own pin sequence by pressing a pattern on your steering, door panel, and centre console. The pin can be changed as often as you like, meaning it is as secure as a credit card. It can be even more difficult to hack due to the fact that it requires up to 20 press.
Ghost also has a Valet/Service mode that lets you deactivate the system if your vehicle will be handed over for valet parking or services which allows it to work within certain parameters, like 30mph speed limits and you don't have to worry about your car being driven recklessly. It is then reactivated with the original key or the key that corresponds to the entry code.
Installed by our certified installers It is the most secure and reliable aftermarket CAN-immobiliser that is available. It is also fully approved by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact cards containing your unique QR codes, as well as an emergency code that is secure. All of these are kept in your purse or wallet.
